Quick Scan X-Ray Detector

Model P-8Neon Series: P-8Neon A and P-8Neon ASC

 

Radioactive Contamination On:

• X-Ray Scanners
• Packages
• Floor or Walls
• State and Federal Regulations require that devices that use or produce X-rays must not emit (leak) X-rays in excess of 0.5 mR/hr from any 10 cm 2 area as measured at a distance of 5 cm.

 

• This should be verified by complete measurement at the time of manufacture, again, upon installation, and periodically thereafter
• A specific measurement of alarmed leak area with a small accurate X-ray mR-meter such as Technical Associates’ Model TBM-IC-X-RAY with 10 cm 2 active detector area X-Ray compliance adapter is ideal for this task.
• Manually scanning the surface of a large cabinet x-ray machine or airport luggage scanner, etc. typically 10 square centimeters at a time is quite tedious.

Technical Associates’ Quick Sweep Rad Detector P-8NEON-A eliminates such labor-intensive scans with large equipment. Scanning large surfaces like walls of equipment is time-consuming and labor-intensive and as such is financially costly if done with handheld devices. The P-8Neon has 8 detectors on a paddle with a handle. Sweeping a large surface area is quick and efficient. The detectors alert individually providing a pinpoint identification of any leak. Utilizing a handheld device to further identify the leak is then easily done.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .